Pennzoil 2-Cycle Outdoor Oil for Air Cooled Engines

Pennzoil 2-Cycle Oil For Air Cooled Engines. For all air-cooled two-stroke engines. Description. Pennzoil 2-Cycle Oil For Air Cooled Engines is a synthetic motor oil made based on high-quality Pennzoil oils specially developed for 2-stroke air-cooled engines. Air-cooled engines are heated more than water-cooled engines for boats that’s why they require special lubrication. The equipment can be significantly heated during operation. Dust and dirt on cooling sides makes more difficult. Pennzoil 2-Cycle Oil For Air Cooled Engines comprises a unique combination of detergents and ash-free dispersants which protect from high-temperature deposits and sticking of the rings, including from dirt and clogging of the port. The needle roller bearings are not protected from wear at high revs. Pennzoil 2-Cycle Oil For Air Cooled Engines is designed for protection of the components and the piston from damage during start and in other operation conditions. It also comprises the additives for protection from rust and corrosion. The unique combination of base oils and additives ensures excellent protection (even in high temperatures and under high loads) of the piston from damage and reduces smokiness of exhaust gases and clogging of spark plugs. It is diluted which ensures its easy blend with gasoline. It is blue-colored for easy detection in the fuel. Application. Pennzoil 2-Cycle Oil For Air Cooled Engines is a motor oil recommended for air-cooled two-stroke engines requiring NMMA TC-W®, TC-WII® or TC-W3® oils. It can be used with gasoline or in the oil injection systems. It is specially designed for use in high temperatures of such equipment as chain saws, air blowers, lawn mowers, snow removal machines and small generators. It is also recommended for two-stroke engines of motorcycles, snow mobiles and quadricycles not requiring NMMA TC-W ®, TC-WII ® or TC-W3 ®. It can be used in any spheres requiring API TC lubricants and is suitable for Rotax engines. For vehicles requiring NMMA TC-W ®, TC-WII ® or TC-W3 ® fluids, it is recommended to use Pennzoil® Premium Outboard and Multi-Purpose Two-Cycle Oil. In severe operation conditions of air-cooled engines, some TC-W ®, TC-WII ® or TC-W3 ® can cause deposit formation, as a result, the rings can become sticky. Pennzoil 2-Cycle Oil For Air Cooled Engines comprises special additives ensuring excellent protection from sticking of the piston rings in such situations. Pennzoil 2-Cycle Oil For Air Cooled Engines is a high-quality lubricant which should be used as fuel for the level of original oils. Always check manufacturer’s recommendations for fuel and oil and apply the recommended proportion. Due to its special composition, Pennzoil 2-Cycle Oil For Air Cooled Engines is not compatible with NMMA TC-W ®, TC-WII ® or TC-W3 ® standards. Be cautious and make sure these products are not blended. When switching from TC-W ®, TC-WII ® or TC-W3 ®, special measures must be taken to prevent blending of the products in the equipment.